Product Selection

Orifice Flange: Tapping, Alignment, and Inspection Guide

Orifice Flange: Tapping, Alignment, and Inspection Guide

An orifice flange is designed to hold an orifice plate and provide pressure-differential connections for flow measurement. The flange pair, pressure taps, orifice plate, gaskets, bore, and upstream/downstream orientation must be treated as one measurement...

Jul 25, 2026
Raised Face Flange: Gasket Contact and Selection Guide

Raised Face Flange: Gasket Contact and Selection Guide

A raised face flange has a gasket seating area raised above the surrounding bolting plane. This geometry concentrates the bolting load on a defined gasket contact area. The facing dimensions, surface finish, gasket type, material, rating, and mating...

Jul 25, 2026
Slip-On Flange: Fit-Up, Welding, and Purchasing Guide

Slip-On Flange: Fit-Up, Welding, and Purchasing Guide

A slip-on flange slides over the pipe and is normally attached with fillet welds. It is widely used because fit-up is straightforward and the flange can be positioned before welding. Correct selection still requires the standard, size, rating, material,...

Jul 25, 2026
Socket Weld Flange: Pipe Fit-Up and Inspection Guide

Socket Weld Flange: Pipe Fit-Up and Inspection Guide

A socket weld flange has a machined socket that receives the pipe end. The pipe is inserted, positioned to the approved fit-up detail, and attached by a fillet weld at the hub. The socket helps locate the pipe, but correct bore, socket depth, pipe...

Jul 25, 2026
Spectacle Blind: Positive Isolation and Inspection Guide

Spectacle Blind: Positive Isolation and Inspection Guide

A spectacle blind combines a solid blank and an open spacer in one figure-eight component. It is installed between two flanges and rotated so the line is either positively blocked or open. Its visible position helps operators confirm the isolation state.

Jul 25, 2026
Weld Neck Flange: Selection, Dimensions, and Inspection

Weld Neck Flange: Selection, Dimensions, and Inspection

A weld neck flange connects to pipe with a butt weld at the tapered hub. The hub provides a gradual transition from the flange body to the pipe, so this type is often selected where pressure, temperature, cyclic loading, or joint reliability is important....

Jul 25, 2026
Anchor Flange: Load Transfer and Project Specification Guide

Anchor Flange: Load Transfer and Project Specification Guide

An anchor flange is a pipeline component used to transfer axial and other design loads from the pipe into an anchor block, structure, or restraint system. Unlike common bolted pipe flanges, many anchor flanges are project engineered and manufactured to an...

Jul 25, 2026
Flange Standards: How to Choose the Correct System

Flange Standards: How to Choose the Correct System

Flange standards define controlled systems for dimensions, ratings, tolerances, marking, materials, and testing within a stated scope. The purchase order must identify the exact standard and contract edition. “ANSI flange” by itself is usually incomplete...

Jul 25, 2026
Flat Face Flange: Gasket Coverage and Equipment Matching

Flat Face Flange: Gasket Coverage and Equipment Matching

A flat face flange has a gasket contact surface that is substantially flat across the flange face according to its design standard. It is used in specific piping and equipment systems where the joint design calls for an FF facing.

Jul 25, 2026
/static/official-alibaba/images/team-01.png

Online Support

Connecting

Ask us anything—we'll reply as soon as we can.

Connecting you to support...